TAG Motorsports is pleased to offer the APR AWD Controller Software for Gen 5 Haldex for the Audi MQB models with Gen 5 Haldex AWD: A3 / S3, 2015-2020 RS3 (8V), 2016-2023 TTS, 2017-2022 TT RS and Q3 (F3).

The APR Stage 1 Upgrade for Gen 5 Haldex is a software-only recalibration engineered to enhance torque transfer and improve traction without altering factory hardware. Developed in conjunction with APR engine and transmission calibrations, Stage 1 optimizes clutch pressure control to better manage increased torque demand under acceleration and launch conditions. From the factory, Gen 5 Haldex systems operate within conservative clutch pressure thresholds designed for stock power levels. As engine output increases, particularly in tuned applications, the factory strategy can limit effective rear axle engagement. APR Stage 1 addresses this by recalibrating the Haldex control unit to proactively command higher clamping pressure during high-load events, ensuring available power is transferred more effectively to all four wheels. The result is faster AWD engagement, improved launch consistency, and greater traction confidence especially when paired with APR performance software. Importantly, Stage 1 maintains full OEM integration and safeguards, preserving daily drivability and seamless operation during normal driving conditions. Installed via direct port flashing of the factory Haldex controller, APR Stage 1 requires no additional hardware. It is the simplest and most cost-effective way to elevate AWD performance while retaining factory refinement. More control. More traction. No compromise. VEHICLE COMPATIBILITY: Designed for VW Golf R Mk7 (2013-2019), Audi RS3 8V (2015-2020), Audi TTS 8S: (2016-2023), Audi TTRS 8S: (2017-2022), VW Golf SportWagen, Alltrack Mk7 / Mk7.5 (MQB), VW Tiguan MK2 (MQB), VW Atlas (MQB), VW Taos (MQB), Audi A3, S3 (MQB), Audi Q3 F3 (MQB), VW Passat / Passat Alltrack B8 (MQB), VW T-roc, Seat Cupra Formentor VZ  REQUIRED UPGRADES & SOFTWARE PAIRING: To ensure proper drivetrain performance, consistency, and durability, the following calibrated software combinations are required. These components are designed to work together as a complete system: Audi RS3 Required: APR ECU + APR TCU + APR AWD Software (all w. Haldex designation) | VW Golf R Required: APR TCU + APR AWD Software (all w. Haldex designation) RECOMMENDED TIRES & PRESSURES: The following tire setups were used to achieve APR’s published performance figures. For similar results, we recommend Michelin Pilot Sport 4S tires in the following sizes: Audi RS3: Front: 265/30R19 | 30 PSI & Rear: 245/35R19 @ 32 PSI & Volkswagen Golf R: Front: 235/35R19 @ 38 PSI | Rear: 235/35R19 @ 38 PSI

Features:

• Stage 1 software-only direct flash of the OEM Haldex control unit
• Works within the factory control architecture vs. piggyback/standalone – no high-cost hardware changes needed, and retains OEM safeguards, drivability, and system logic.
• Switchable on-the-fly AWD Mode & FWD Burnout Mode: Using the factory hazard button, drivers can instantly switch between AWD Mode and FWD Burnout Mode.
• Faster AWD engagement: APR recalibrates the factory Haldex system for quicker rear torque transfer, helping reduce hesitation and improve traction when accelerating hard.
• Optimized launch control: Enhanced rear torque transfer and launch consistency for higher power levels and repeated hard launches, combinable with supporting ECU and TCU enhancements.
• Optimized clutch pressure control for launch conditions: 7-8 Bar clutch pressure increases in Stage 1 tune, using only software.
• Burnout Mode: Factory-integrated front-wheel-drive mode to clean and warm tires before launching
• AWD Mode (default) advancement: quicker response to throttle/slip and earlier back-off to reduce driveline stress.
• Built-in speed-based safety protection: If rear wheel speed exceeds 30 KPH while in FWD Burnout Mode, the system automatically restores full AWD operation. When speed drops below 30 KPH and conditions are met, FWD Burnout Mode resumes.

Installation: DIY install at home with an APR UltraLink (sold separately), or have it installed at TAG Motorsports or any authorized APR dealer. Note: the tune is purchased during the install.

Fits: Audi MQB models with Gen 5 Haldex AWD: A3 / S3, 2015-2020 RS3 (8V), 2016-2023 TTS, 2017-2022 TT RS and Q3 (F3)

APR part numbers: SW300001-01 (Stage 1), SW300001-02 (Stage 2)

Emissions: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020.

About TAG:

TAG Motorsports is proud to be an APR dealer, selling to customers worldwide. We are also an APR installer and service center, serving customers in Southern California.