AWE Tuning Exclusive: H&R McLaren 650S Lowering Springs
Presenting the only solution for lowering your 650S.
- Limited availability
- Exclusively available from AWE Tuning, by H&R Springs
- Specifically designed for 650S cars equipped with Vehicle Lift... this is your sole solution!
- Lowers your 650S by 1.0" both front and rear, while retaining stock spring rate
- Tested to ensure 100% compliance with factory on-board monitoring systems
- Fixed spring perch system
- Manufactured by H&R Springs for AWE Tuning
Finally, a lowering solution for the McLaren 650S with Vehicle Lift. These springs were designed to lower a McLaren 650S equipped with Vehicle Lift by 1.0" in both the front and rear. These springs utilize the factory fixed spring perch system, retain the stock spring rate, and are tested to ensure they are 100% compliant with the factory on-board monitoring systems.
Since they are from H&R, you know they are the good stuff (we're talking a ISO 9001 certified facility, manufactured in Germany, made from special 54SiCr6 spring steel which has strength rated at 290,000 psi).
|Exhaust Tip Size||90mm|
WARNING: Consuming this product can expose you to chemicals which are known to the State of California to cause cancer, as well as chemicals which are known to the State of California to cause birth defects and/or other reproductive harm. For more information go to www.P65Warnings.ca.gov