GiroDisc Ferrari 398mm Front 2-Piece Slotted Rotors - Ferrari 296 / 458 / 488 / 812 / F12 / F8 / FF / GTC4 Lusso / SF90 - A1-111
GiroDisc Ferrari 398mm Front 2-Piece Slotted Rotors - Ferrari 296 / 458 / 488 / 812 / F12 / F8 / FF / GTC4 Lusso / SF90 - A1-111
TAG Motorsports is pleased to offer the GiroDisc Ferrari 398mm Front 2-Piece Slotted Rotors (part number A1-111) for the Ferrari 296 / 458 / 488 / 812 / F12 / F8 / FF / GTC4 Lusso / SF90.
The Girodisc system is a direct replacement for the OE disc however a different brake pad with an annulus (pad swept area) of 66mm or less must be used. This is done to keep the rotor weight at a reasonable level. If we manufactured a rotor with the same annulus as the OEM CCM rotors they would be far too heavy.The necessary pad shape is very common and also found on the Nissan GT-R, Cadillac CTS-V and most AMG Mercedes equipped with 6 piston calipers. If there is a specific pad compound you're after please contact us directly to provide the correct part numbers.
The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/priced per pair.
GiroDisc part number: A1-111. Sold and priced per pair (one axle).
Fits: Ferrari 296 GTB/GTS; Ferrari 458 458 Italia/Spider; Ferrari 458 458 Speciale; Ferrari 488 GTB/Pista/Spider; Ferrari 812 812 Competizione (incl. Aperta); Ferrari 812 812 Superfast/GTS; Ferrari F12 F12berlinetta; Ferrari F12 F12tdf; Ferrari F8 Tributo; Ferrari FF; Ferrari GTC4Lusso; Ferrari SF90 Stradale.
| SKU | A1-111 |
|---|---|
| Brand | GiroDisc |
| Exhaust Tip Size | 90mm |
PROP65 WARNING

PROP 65 WARNING – Products sold by TMS such as lead acid batteries contain lead, which is known to the
state of California to cause cancer and birth defect or other reproductive harm. Safety Data Sheets for
products sold by TMS are available upon request.
For more information go to:
www.p65warnings.ca.gov/fact-sheets/lead-and-lead-compounds
