Aventurine Green Porsche 992 Turbo S on Brixton FDE01 Carbon+ Wheels with Full TechArt Aero | TAG MOTORSPORTS

A customer's Aventurine Green Metallic Porsche 911 Turbo S, with Brixton Forged wheels, TechArt springs and the full TechArt aero program from TAG Motorsports.
The 992 Turbo S is about as complete as a modern 911 gets: a twin-turbo 3.8L flat six, all-wheel drive and launches that never get old. This 992.1 came to us in Aventurine Green Metallic with yellow PCCB calipers and a brown leather interior, and the customer's plan came together in two stages. Stage one was wheels and stance. Once that was sorted, the customer came back for the full TechArt aero program, finished with gold accents custom-painted by TAG to tie the bodywork back to the wheels.



As Delivered
Here's the car as it rolled in on its factory Turbo S wheels.

Brixton Forged FDE01 Carbon+ Wheels
Stage one started with a set of 21/22-in Brixton Forged FDE01 Carbon+ wheels. The twin-spoke faces reach all the way out to the edge, and the carbon fiber barrels show just inside the tire sidewall. The bronze finish against Aventurine Green is a combination that looks right in any light, with the yellow PCCB calipers peeking through the spokes. They're wrapped in Michelin Pilot Sport 4S tires (F: 255/30ZR21 | R: 335/25ZR22) and got a Ceramic Wheel Protection Coating before going on the car.












TechArt Height Adjustable Springs
To get the stance right, we installed the TechArt Height Adjustable Spring Kit. Because the ride height is adjustable, we could set it exactly where the customer wanted rather than settling for a fixed drop, closing up the wheel gap so the 21/22s fill the arches properly.




Stage One: Wheels and Springs
With the Brixtons and TechArt springs on, the car already had a completely different presence. Here's stage one, along with a look at that brown leather cabin.















Stage Two: The Full TechArt Aero Program
Then came stage two. The customer went all in on TechArt for the Turbo S: front apron, air intake trims, side mirror trims, side skirts, rear diffuser, rear apron air outlets, Rear Spoiler I and the roof spoiler. The crates showed up, the carbon got laid out, and the front of the car came apart. TechArt's pieces follow the factory lines, so the finished car looks sharper and more aggressive while still reading as a Porsche.












TAG Custom-Painted Gold Accents
The finishing touch is the gold. We custom-painted the accents in the front apron, the rear apron and the diffuser fins to match the bronze Brixtons, so the wheels and the bodywork read as one design. Add the exposed carbon on the side intakes and the Rear Spoiler I, and every angle has something to look at.






The Finished Car
Two stages, one very cohesive Turbo S. Enjoy the pics!




























Build Spec
Porsche 911 Turbo S (992.1)
21/22-in Brixton Forged FDE01 Carbon+ Wheels
Ceramic Wheel Protection Coating
Michelin Pilot Sport 4S Tires (F: 255/30ZR21 | R: 335/25ZR22)
Techart Height Adjustable Springs
TechArt Front Apron
TechArt 992 Carrera Air Outlet Grille
TechArt Side Skirts
TechArt Side Mirror Trims
TechArt Air Intake Trims
TechArt Rear Diffuser
TechArt Air Outlet for Rear Apron
TechArt Rear Spoiler I
TechArt Roof Spoiler
TAG Custom-Painted Gold Accents
Products in This Build
Brixton Forged Wheels
TECHART Height Adjustable Spring Kit for 992 Turbo
TechArt Front Apron for 992 Turbo / S
TechArt Side Skirts for 992 Turbo / S
TechArt Rear Spoiler I for 992 Turbo / S
View the Stage One Gallery
View the Full Gallery
Like what you see? Call us today at 760-741-9300 to start planning your build.










